unclepunchy
Well-Known Member
Need a decent set of 3/8” Cup and Ball style pushrods for my 383 build. Cheers!
PM SentI have a set
Yes, that would be great. Let’s do that and ship them together.I set up a block and heads and measure and come up with the right set.
$50.00 to $100. depending on material and thickness. I have 50= Sets in
the shop! I can hold off shipping the rocker to you for a day or two until
I find the correct pushrods and ship them all togethert if you want?
I’ve used adjustable rockers each time. The last were Harland sharps on the stroker. I remeasured and made sure the geometry was what I wanted. I ordered them and they have been perfect. Plan on measuring and getting them right! If geometry is off, you won’t like that.I have adjustable rockers coming in the mail so I thought I might have a bit of breathing room with size? Should I get one of those adjustable push rods just to be safe?
My heads have not been decked and they are stock iron, 516 casting.
Good advice.I’ve used adjustable rockers each time. The last were Harland sharps on the stroker. I remeasured and made sure the geometry was what I wanted. I ordered them and they have been perfect. Plan on measuring and getting them right! If geometry is off, you won’t like that.