• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

426 Hemi Mounts 64 Plymouth

moparfreak92

Well-Known Member
Local time
11:26 PM
Joined
May 3, 2014
Messages
62
Reaction score
100
Location
Kiel
I'm looking for a 426 Gen II Hemi Motor Swap Mount Set that fits with exhaust manifolds for 64 Plymouth Fury
 
I can convert your K member to a Hemi one. Everything will fit correctly
 
Engine plate// Elephant ears

14425464_1114470785297203_6238867391566985267_o.jpg
 
There are 2 positions for the Hemi in a B body. The Race Hemi (64 and 65) is approximately 1 5/8" further forward than the Street Hemi position. This is due to the cross ram. Ask me how I know.
 
There are 2 positions for the Hemi in a B body. The Race Hemi (64 and 65) is approximately 1 5/8" further forward than the Street Hemi position. This is due to the cross ram. Ask me how I know.

It's not a race Hemi:D

IMG-20201027-WA0011.jpg
 
Made pattern off 66 Hemi k frame welded them to a 65 Dodge k frame . This where engine ended up. Headers and x ram dictated position, this before tti. Not best picture, wish was 1.5" forward.
dode pss side eng.jpg
 
There are 2 positions for the Hemi in a B body. The Race Hemi (64 and 65) is approximately 1 5/8" further forward than the Street Hemi position. This is due to the cross ram. Ask me how I know.
That’s not the case with the 62 - 65’s. All of those motors set farther forward possibly because of the clearance issue. If you had an issue with the cross ram manifold hitting the firewall it was probably because the k-frame was from a 66 and up B-body.
 
As I stated there are 2 positions for the B body. I did not state there are 2 positions for the 62 - 65 B body. And yes the vendor made up the the wrong K member.
 
Auto Transport Service
Back
Top