426 street wedge valve covers

[Nick ciavarino]

Where can I find the correct breathers and grommets for my street wedge valve covers Thanks Nick.

 

[Lefty71]

Others will know more than me im sure...... I thought that street wedge used the short stack style six bolt valve covers, same on both sides, but in chrome. So there is no grommet... the oil fill cap is a breather, and the PCV fitting is adapted to a similar cap for the other side. So, I don't know where to get a correct (new, chrome ) cap and PCV set, but you can find the right parts (old ones) on any similar vintage engine, including Poly 318's which are lying around, and maybe clean them up and get them chromed??? HTH, Lefty71

 

[1965ply]

Where can I find the correct breathers and grommets for my street wedge valve covers Thanks Nick.

Contact Joe Suchy he in Fairburn Georgia 770 964 4441 [email protected] he has correct breather and pcv valve

 

[toolmanmike]

Mega Parts USA has lots of Hemi goodies. Same oil and pcv cap is used on the HP 273's

 

[Lefty71]

Mega Parts USA has lots of

Good Show Mike!! I see both the parts i was describing in their listings.

 

[toolmanmike]

Good Show Mike!! I see both the parts i was describing in their listings.

And Roy and Jamie are great to work with. A great family business.

 

[theman440]

True 426 Street wedge valve covers don't have grommets -

 

[Lefty71]

A little late to the party.....but I found the Mopar Perf part numbers for both items Nick asked for;

P4529895 for the chrome PVC package
P4529896 for the chrome push-on breather

These were available from Mopar through at least the mid-90's, listed for early gen2 Hemis, but they were the same parts used on Street Wedges. HTH, Lefty71

 

[Dave6T4]

Expect to pay about $200.00 for the pair, new. I managed to scrounge nice ones at swap meets for considerably less.

 

[dmoore]

Reproductions are incorrect with the valve cover gasket notches.