6t4polara
Well-Known Member
Contact seller
440 Chrysler engine .30 over actually 446 cu.in.
9.37to 1 compression ratio
Cylinder heads ported bowls blended, 2.14" intake valves, 1.88" exhaust valves 3 angle valve job,bronze guides, Mopar roller rockers 1.5 ratio
Crane Hydraulic Roller cam, 509"- 528" lift at .050 $1004.00 of head work. Valve Springs shimmed professionally,perfectly, for cam.
Short block built professionally by S&A auto clinic Allen Park Mi. Assembled with ARP studs. Fel Pro gaskets.
Edelbrock Streetmaster dual plane intake, powder coated, with 800cfm Holley Double Pumper carb, just rebuilt last summer.(Mopar M-1 single plane Hi rise intake available).(Also powdercoated).
Milodon High Volume oil pump, 80-85psi oil pressure, 45lbs at idle, hot and running.
Aluminum High Volume water pump,
Lightweight Hi Torque starter
Holley High Volume gas fuel pump & regulator, custom bent 3/8" fuel line.
1500 miles since assembly ,no strip time and senior owned.
Hooker Headers available for B Body Mopar 62-65 for additional cost
Price is $2,850.00 carb to pan.
Reason for selling going with a Ray Barton Hemi.
Runs beautifully on premium pump gas, I built this engine to be in my car for cruising, and car shows. It had the best maintenance available. I decided, to go with a different engine configuration, for my car.
Thanks for the ad
9.37to 1 compression ratio
Cylinder heads ported bowls blended, 2.14" intake valves, 1.88" exhaust valves 3 angle valve job,bronze guides, Mopar roller rockers 1.5 ratio
Crane Hydraulic Roller cam, 509"- 528" lift at .050 $1004.00 of head work. Valve Springs shimmed professionally,perfectly, for cam.
Short block built professionally by S&A auto clinic Allen Park Mi. Assembled with ARP studs. Fel Pro gaskets.
Edelbrock Streetmaster dual plane intake, powder coated, with 800cfm Holley Double Pumper carb, just rebuilt last summer.(Mopar M-1 single plane Hi rise intake available).(Also powdercoated).
Milodon High Volume oil pump, 80-85psi oil pressure, 45lbs at idle, hot and running.
Aluminum High Volume water pump,
Lightweight Hi Torque starter
Holley High Volume gas fuel pump & regulator, custom bent 3/8" fuel line.
1500 miles since assembly ,no strip time and senior owned.
Hooker Headers available for B Body Mopar 62-65 for additional cost
Price is $2,850.00 carb to pan.
Reason for selling going with a Ray Barton Hemi.
Runs beautifully on premium pump gas, I built this engine to be in my car for cruising, and car shows. It had the best maintenance available. I decided, to go with a different engine configuration, for my car.
Thanks for the ad
Last edited: