Any of you guys running their 400.470.5076 kit and have an opinion to share? 4.375" bore (.035" over), -27 dish pistons .002 below deck, 9.4:1 compression with 78cc heads and .039 head gasket.
Other parts I have in a motor now that am thinking of reusing: Racer Brown SSH-44 HFT 242/242 duration @.050 .543 intake/.510 exhaust valve lift 108 lobe separation, Harland Sharp rockers 1.6 in 1.5 ex, Edelbrock Performer RPM intake, Quick Fuel Q-850, TTI headers.
And a new set of Trick Flow 240's to replace the Stealths I was using.
Currently I have Sources 400-451-5068 4.382 (.042 over) -12 dish .023" below deck 9.6:1 compression.
69 Road Runner, 4-speed, Strange 60 3.54, 28" tall rear tires. Looking for 550 hp and torque, which it should easily make.
Other parts I have in a motor now that am thinking of reusing: Racer Brown SSH-44 HFT 242/242 duration @.050 .543 intake/.510 exhaust valve lift 108 lobe separation, Harland Sharp rockers 1.6 in 1.5 ex, Edelbrock Performer RPM intake, Quick Fuel Q-850, TTI headers.
And a new set of Trick Flow 240's to replace the Stealths I was using.
Currently I have Sources 400-451-5068 4.382 (.042 over) -12 dish .023" below deck 9.6:1 compression.
69 Road Runner, 4-speed, Strange 60 3.54, 28" tall rear tires. Looking for 550 hp and torque, which it should easily make.