60s-70 Mopar B body console auto trans parts to convert your car to floor shift

[696pack]

I have a complete set up from the console shifter to the trans for someone that is converting either a manual trans car or a column shift auto to a floor shift auto.

These are very hard to find parts in this condition.

These came out of my running and driving 80K original mile 1966 Charger and the parts are NICE. In addition to 1966 these parts were used through 1968 on various B bodies with floor shift auto.

I converted my car to a 4 speed so here is your chance to get some nice parts for that conversion you want to make.

Included is the auto console top plate, the floor bracket that is welded to the floor to hold the shifter and mount the console top to. the shifter with linkage and trans body attachment piece, the down rod, the shift kick down linkage and the brake pedal assembly. The chrome on the shifter is really nice as is the console top plate even though it is a little dirty in the picture. Note that the car this was removed from had the console mounted clock hence the holes in the front of the top piece. This is the same area that could have a vacuum gauge or the tach mounted on the console on different cars for 66 or 67.
PM for email address.

$450. for all of it plus shipping.

 

[696pack]

btt

 

[Budnicks]

would you consider selling with out the shifter linkage & associated parts ?? or maybe some possible trades, if so PM me & we can excahnge E-Mail addresses & other information, then maybe discuss a possible price, maybe you could E-mail/send me or post some pitchers also... I don't see any posted even thou you referenced them...

 

[charger2011]

i"m interested in the shift linkage and trans body attachments for my console shifter,i don"t need the consloe or foot pedals , would you be willing to sale .PM me so we can talk about a price.

 

[696pack]

btt

 

[Pauls68]

picture of the bracket

btt

Hi does anyone have a picture of the bracket that is welded to the floor that holds the floor Auto shifter and the console top plate?

with the vehicle I have just bought it has been converted to console auto from column shift, quite a good job of putting in a B&M shifter has been done, but to have it legal in South Australia it needs to have the original shifter. On taking off the console plate there is not bracket there at all to hold the original shifter and I have no idea what it is supposed to look like.

any pics would be great!

 

[Pauls68]

Thanks for Pics Moparjohnny, all sorted now