62 Taillight Seals

[Stumper]

Does anyone make, or carry OEM taillight seals for the 62 Plymouth B body? These are the rubber seals between the lights and the body. I’ve found the lense/light gaskets but not the rubber seals.

 

[polee]

Does anyone make, or carry OEM taillight seals for the 62 Plymouth B body? These are the rubber seals between the lights and the body. I’ve found the lense/light gaskets but not the rubber seals.

Detroit Muscle Technologies Warren Mi

 

[Stumper]

Detroit Muscle Technologies Warren Mi

They only carry the gasket that goes between the lense and the light itself, not the seal between light and body.

 

[khryslerkid]

Contact James at Detroit Muscle by phone or email and ask if he has them. They may not be listed. If not maybe he would have the material like they use behind the '62 Dodge tail light housings (white foam) and you could make your own.

You could try Joe Suchy. Most likely he would have the Detroit Muscle products but he would know if there was another source for them.

Good luck.

 

[Stumper]

I have talked to Jim at DNT, they don’t carry them. He was going to look into the cost of having some made up,

 

[khryslerkid]

Does the housing take a flat gasket or does it rap up over the outside? If flat and if there is anything left of your old gaskets you could measure the thickness and look for some closed cell material like this...

https://www.ebay.com/itm/1-8-Thick-...2349624.m46890.l49286&mkrid=711-127632-2357-0

 

[chignikred]

The correct description on this gasket is rubber slotted, or U cord. Used for many other applications and sold by the foot. Foam is not what he asked for, which is easy to fab.
Not unique to mopar parts.

 

[khryslerkid]

The correct description on this gasket is rubber slotted, or U cord. Used for many other applications and sold by the foot. Foam is not what he asked for, which is easy to fab.
Not unique to mopar parts.

It's what I asked, is it flat or rapped around.