64 dodge 330 2 door

[black64]

I have a nice 64 dodge that I was going to make into a bb car it is currently a nice running slant 6 3 spd manual. It has a nice interior except the door trim panels need replacing the headliner, carpeting, and seats are like new. The paint and body work where done by the previous owner. The car has a new gas tank and lines as well as new brakes and lines from the po. I recently decided I would like to do a 65 plymouth satelite or belveder II instead so if you have one of those and want to trade let me know. I prefer a car in the condition mine is in. I do not need an engine or trans if that helps.

 

[alleyoopmgv]

Nice car

 

[evanbrendel]

yes it is

 

[696pack]

You should certainly have no problems selling that car, there is always someone looking for one of these to build a Max Wedge clone.

 

[black64]

I would sell it if I do not get any takers for what I'm looking for. I have a 67 440 just redone carb to pan out of a 67 300. Also a redone 727 with all the good parts, and a bunch of other parts to make a max wedge car.

 

[Gary67]

Nice, what brand wheels are those?

 

[birdsuper70]

nice looking car,good luck with the sale.

 

[black64]

Nice, what brand wheels are those?

The rims are american originals light gray instead of the dark gray.

 

[black64]

I have a nice 64 dodge that I was going to make into a bb car it is currently a nice running slant 6 3 spd manual. It has a nice interior except the door trim panels need replacing the headliner, carpeting, and seats are like new. The paint and body work where done by the previous owner. The car has a new gas tank and lines as well as new brakes and lines from the po. I recently decided I would like to do a 65 plymouth satelite or belveder II instead so if you have one of those and want to trade let me know. I prefer a car in the condition mine is in. I do not need an engine or trans if that helps.

I will trade for a 68 or 69 charger also.

 

[MtNemoMopar]

Hi Black64
Good looking 64. Have you decided on a price for outright sale? I'm looking for a companion for my Swinger.
Take care
Bill

 

[black64]

Hi Black64
Good looking 64. Have you decided on a price for outright sale? I'm looking for a companion for my Swinger.
Take care
Bill

Not yet but might consider an offer.

 

[evanbrendel]

how much for the 440?

 

[black64]

how much for the 440?

The 440 is not for sale. It could be part of the deal for a swap however for the right car. Or sell the whole thing with all the parts included.

 

[black64]

Well no trade offers that I would accept so I will put the car for sale for 20 k it includes a running car as is with the slant 6 3spd. With the following 67 440 rebuilt top to bottom 30 0ver bore 6 pack pistons 10:35 to 1 compression, 303 voodoo cam, rhoads lifters, completely balanced, block decked and heads redone 915 close chambered, all new etc. 727 trans with all hd parts and shift kit. New 2800 stall convertor. And a 65 8 3/4 housing with 11 inch brakes. M body front disc brake spindles and calipers and porportining valve to convert to disc up front. I also have a 4spd manual that needs rebuild if you want to keep it manual.

 

[evanbrendel]

i have the same s&k tool box lol

 

[black64]

Car without parts $12000 OBO or trade.

 

[black64]

Car without parts $12000 OBO or trade.

Reduced to 11000 for car

 

[black64]

reduced to 10000

Car reduced to 10000 or best offer

 

[black64]

Sale pending

 

[moparme]

Well ???