65Bman
Active Member
Does anyone out there know the exact deminsions of a '64-'65 A-990 hood scoop?
'65 hemi hood scoop
- Thread starter 65Bman
- Start date
gearheadbill
Well-Known Member
what size?
I can post the size thurs morning,if you wish?
I can post the size thurs morning,if you wish?
65Bman
Active Member
Hey I would appreciate that. I can make several pieces for the cost of one elsewhere. I'm a perfectionist so rest assured it won't look cheesy. Thanks a lot gearhead bill.
---------------------------------------
1937 Ford 2-door flatback 350/turbo 400
1955 F-100 300 cu in 6/C6
1965 Plymouth Satellite 340/727
Go ahead sue me but the mopar's my favorite.
---------------------------------------
1937 Ford 2-door flatback 350/turbo 400
1955 F-100 300 cu in 6/C6
1965 Plymouth Satellite 340/727
Go ahead sue me but the mopar's my favorite.
gearheadbill
Well-Known Member
hood size
Well here goes
over all length from front to back is 4o'
thats bottom of hood scoop
top of scoop overall length is 38
scoop height is 2 1/4'(-inside is 1 3/4)'
height at back is 3/4 '
width is front 33'-back is 30'
There is some detail on the hood scoop it self kind of hard to explain,there are some photo"s of the car in the gallery,don't know if you can see the detail or not,I can take some other photo"s to help if need be?
Let me know.
Bill
Well here goes
over all length from front to back is 4o'
thats bottom of hood scoop
top of scoop overall length is 38
scoop height is 2 1/4'(-inside is 1 3/4)'
height at back is 3/4 '
width is front 33'-back is 30'
There is some detail on the hood scoop it self kind of hard to explain,there are some photo"s of the car in the gallery,don't know if you can see the detail or not,I can take some other photo"s to help if need be?
Let me know.
Bill
65Bman
Active Member
Thanks a bunch!
That's enough to get me started. I used to have a '66 Belv. II that in irony had a 64/65 hood scoop simply because at the time I bought that hood scoop there wasn't an RO/WO-23 scoop available so I'm familiar with the detail you mentioned. Great looking 330. My brother's working on a 64 440.
He's going to build a poly motor with edelbrock valve covers and 3-2 intake. Anyway I appreciate the detailed measurements very much.
That's enough to get me started. I used to have a '66 Belv. II that in irony had a 64/65 hood scoop simply because at the time I bought that hood scoop there wasn't an RO/WO-23 scoop available so I'm familiar with the detail you mentioned. Great looking 330. My brother's working on a 64 440.
He's going to build a poly motor with edelbrock valve covers and 3-2 intake. Anyway I appreciate the detailed measurements very much.
Similar threads
