66-70 B-body Parts

[kb67mopar]

I have a couple parts I took off my 66 Coronet parts car, should work on a 66-70 as far as I know. Passenger side inner fender and front core support.
Both will need a little hammer and dolly work at the mating flanges from removal but are in excellent shape.

Please PM if interested

Inner Fender ($75 + shipping)

Core Support ($50+shipping)

View attachment 60014

View attachment 60015

View attachment 60016

 

[kb67mopar]

:sSig_bump2:

 

[kb67mopar]

New prices:

Inner Fender $50 + ride

Core support: $25 + ride

 

[kb67mopar]

A few other parts. Let me know if interested.
Add shipping to all prices
3 of the doors are for sale, the passenger front is not as I need a patch out of it. The drivers front has some damage. Make an offer.

Drivers side quarter had about 1/8 of bondo in it but I can't find any patches or damage. I think the damage was farther up and they just filled all the way down. There is damage on the upper but the lower is good. $150 + shipping



Passenger quarter has rust at the bottom of the lower, the upper half is good. I will be keeping the wheel well section so basically the upper quarter is for sale. $75+shipping. (will cut to a patch panel dimension if you provide me the distance for the cut line)


Dash is good, pad is cracked in the middle, not sure what they go for, make an offer.



66 Coronet tail sections, as you can see lots of spot welds here. $50+shipping for the pair


66 Coronet Tail light Bezels, $50 for the pair

 

[Mrkrisdodgeboy]

Man, you disected that thing....lol.

 

[kb67mopar]

I needed some parts! It is amazing how many panels you have to take off to get the trunk out in one piece. A couple panels felt the wrath of my air chisel. :icon_rambo:

 

[runner69]

I am interested in the core support and the inner fender if you still have them.

 

[kb67mopar]

replied to your pm, still available.

 

[kb67mopar]

Inner Fender and Core Support .....SOLD Thanks FFBO

I still have lots of other stuff available here guys....

 

[Cranky]

I'm just now getting my car cleaned off to where I can actually get in it again and do some measuring for what I need....hope you still have what I need lol

 

[kb67mopar]

I should...I still haven't sold the rolling chassis and most of the exterior sheet metal. I know you had wanted part of the floor....its still there.

 

[kb67mopar]

I still have this stuff guys, lots of good sheet metal and patch panels can be cut out of this stuff. Let me know what you need and I'll make a deal. I'd much rather give this stuff away at a discount price then see it rust or get scrapped!

 

[kb67mopar]

:sSig_bump2:

 

[kb67mopar]

Quarters are sold, the rest is still available.

 

[hemi70b]

Do you have hood by chance?

 

[kb67mopar]

Do you have hood by chance?

I do but it would need some work as the back right corner is tweaked from the previous owner, though the sheet metal has no crease. If you want it, come get it, I'll give it to you for free.