• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD 67 Charger L Code 4spd Dana Project $7000

Status
Not open for further replies.

mopar6970

Well-Known Member
Local time
2:40 AM
Joined
May 15, 2013
Messages
73
Reaction score
23
Location
Va.
Feedback: 1 / 0 / 0
Contact seller
1967 L code Charger. Factory 440 4 speed Dana 60 car. One of 132 440 4spd cars built. Original owner pulled the engine out in the early 80s for a rebuild and car was never put back together. I have the block, crank, dual snorkel air cleaner, exhaust manifolds and radiator shroud. * heads, intake, carb, distributor, radiator are missing. I have the 4 speed, Inland shifter, bellhousing, Z bar, flywheel and driveshaft. Dana 60 has 3:54 gears. Black Interior is complete and has the famous “RECALLED“ 3 spoke steering wheel.. Car has solid frame rails. Needs full interior floors. Trunk will need a small patch in spare tire well. Quarters are decent with some rust behind the PS wheel well……DS has a crease and a dent. Doors are starting to show rust along the bottom. Fenders have some lower rust. Hood and trunk lid are junk…I have a good hood. Vent fins in the cowl are rusty and pitted but I have nice cowl panel to go with it. Car has fender tag and probably a build sheet as the interior has never been pulled out. The original title was lost in a house fire but the new title is on the way. (April 5). This is a very good project and a rare one at that. $7000.00 I will be adding more pictures, So if there is something you want to see
let me know. Not interested in trades. PM me for a contact # for ?s……Serious inquiries only please. Thanks for the ad!

F9C56886-99A9-4963-8A54-657A954A1CAF.jpeg


03970D55-AA3C-4A44-A576-C73428999653.jpeg


8F971420-9ADF-410D-9AFB-2C1BB79EEB15.jpeg


28C2A269-A908-4856-8D56-01A33F9538AF.jpeg


0EB5D949-FBF0-467D-9203-B9370C2A70EE.jpeg


5E57AF78-AAA1-4CE0-B6BE-023961C2206C.jpeg


A48974B0-EB6D-4D6A-AE91-AF59985EA221.jpeg


41371493-0A4E-4210-B02D-2B5CACAA4676.jpeg


1D10B192-CB1A-488F-BF25-B41E837C6996.jpeg


FC4C065B-826E-4C51-9860-EF1CCF19737D.jpeg
 
Last edited:
I will add some more underside pix over the weeken.

1F66D284-F20D-48AF-A05D-B6B5CD9F3F35.jpeg


FB2A2129-93D6-4E34-8461-53F7EC2D4C3E.jpeg


43FBF384-0083-461D-8A10-36D6AEB0964B.jpeg
 
The block was bored .010 over I think but you can’t buy .010 pistons that I know of. Rods and pistons were MIA. I never checked crank journals. Everything was covered with bearing grease so there should little to no corrosion.
 
Dropped it down to $7000.......Hoping someone will save it.
 
Is all the linkage and mount for the shifter there?

Man I wish you were closer.
 
Yes linkage is still on the trans......if you blow up the pix you'll see it.

Here's the fender tag....

IMG_20230328_120144695.jpg


IMG_20230220_162033863.jpg
 
Now has Clear Va. Title……….
** 67 Charger 440 4spd - 1 of 132 produced / 18 known to exist to date **
I guess nobody wants to save it and Im tired of messing with it, so its getting parted.

67 Charger L code 4spd body rolling w/8.75 rear and clear Va. title. Asking $3000

67 440HP block w/crank (10/24/66 casting date //// 12/6 assembly date Asking $1500

67 18 Spline 4spd swap; Steering column (no wheel), Pedals w/push rod, 11" flywheel, 11" Bell housing w/fork, Z bar w/fork rod, 18 spline trans, Inland console shifter linkage Asking $3500

67 Dana 60 w/ 3:54 gears complete drum to drum. Asking $3500
 
"Recall" steering wheel cleaned up

received_969970780669229.jpeg


received_1711582119258463.jpeg


received_781026916657879.jpeg


received_598430008912524.jpeg


received_1439558936784608.jpeg
 
Status
Not open for further replies.
Auto Transport Service
Back
Top