67 fender panels

[Dgc]

does anyone know who makes a replacement panel for the front of 67 coronet fender
looking for the inside panel where it mounts to inner fender behind the head lites
I dont think its made so prob have to fab one

 

[YY1]

Which side do you need?

 

[Brandy]

I was going to tell him to contact you YY1..and if you did not have it I would go up to Gates and cut one off for him..

 

[Dgc]

Which side do you need?

def need passenger side I think I can still work with driverside, I can take a pic to make sure we are talking about same part its part of the fender really, bent at 90 behind head lights and bolted on by 3 bolts to inner fender in engine compartment
thanks for your help
Dave

 

[Brandy]

def need passenger side I think I can still work with driverside, I can take a pic to make sure we are talking about same part its part of the fender really, bent at 90 behind head lights and bolted on by 3 bolts to inner fender in engine compartment
thanks for your help
Dave

Understood, you two let me know.

 

[YY1]

I'll look.

 

[Dgc]

I'll look.

did you have any luck looking for fender parts ?
thanks Dave

 

[Dgc]

I was going to tell him to contact you YY1..and if you did not have it I would go up to Gates and cut one off for him..

did you have any luck looking for fender parts?
thanks dave

 

[Brandy]

I'll call up to Gates salvage and see if they still have the parts.

 

[YY1]

Going to shop today but have to replace garbage disposal first

 

[Brandy]

Going to shop today but have to replace garbage disposal first

A good mans work is never done..

 

[YY1]

Stopped at the shop for some tools.

I have a pass side donor fender.

I also have the headlight bucket mount on the part I cut out of the driver's side and sent to GhostRider, if that would work.

Did not have time to get it down from the mezzanine.

We'll see how the rest of the disposal project goes.

Maybe I can get back to the shop this afternoon.

 

[A383Wing]

A friend of mine reproduces these, both the front and rear out of fiberglass so they will never rust out. He has them up on eBay all the time.....if you can't find it, let me know and I'll point you in the right direction

 

[YY1]

I have this-

...and this-