SOLD 6768 29881 Master Cylinder CORE

[YoungGun87]

Will definitely need a rebuild
Not sure the worth, just figured I'd throw it out there in case anyone's interested
Stamping #'s are 6768 29881 G(maybe?)7 - can't make out what's beside the 7
The rubber piece doesn't appear to have any rips or tears with "Made in USA" (hardly see that anymore) "ADM" - P/N: 20872
Last core I've seen went for $25 + shipping so let's start there
From 31750
Paypal F&F
Thanks, FBBO

 

[XS22J8R]

That’s a Raybestos/NAPA United master cylinder per the casting number 29881.

 

[YoungGun87]

Thanks, wasn't sure.
Only other thread I could find with one similar was this one in 2015 but the stampings are a little different other than the 29881

SOLD - Two drum brakes with non-power master cylinder

Two drum brakes with non-power master cylinder. The drum brakes are off my 1969 Coronet R/T and measure approximately 12-3/4" across. They have standard studs (not LH studs) and the non-power master brake cylinder has a base plate approximately 4" across. The master cylinder has numbers 29861...

www.forbbodiesonly.com

 

[XS22J8R]

I was an engineer for Raybestos from 90 to 2005 so that is why I recognize my old employers parts.
The OEM master cylinders were made by Bendix.
I don’t have my reference material with me I’m at Moparty now but one OEM drum MC had a casting number like 2225601 and the other ended in 808 but that’s from my memory and may be off.

 

[YoungGun87]

Ah okay, I tried looking up the casting # but couldn't find anything that matched.
Was in the box of parts that came off the car when we bought it but guess someone had replaced it back in the day somewhere along the line.
I sure don't want to put wrong info out there and it may just be good for nothing but a paper weight so I appreciate the heads up.