68-69 Bucket seat belts , complete black set w/ bolts

[6pktgo]

All of these came out of the 69 Charger pictured, except for the shoulder belts. They`re going to need a good soaking & cleaning. I already did the two shortys in the back seat & they came up great. The shoulder belts are the worst as they`re starting to frey, but if your car didn`t have that option, you`re in no need of them anyway. The retractors work good. There are no lazy or broken springs in the latches. They all work properly. The short ,shoulder belt buckle on the front passenger side ,has a little rust ,other than that, they`re pretty good. The correct bolts are supplied to fasten these in. $225 shipping included by postal M/O or $230 shipping included by Paypal PM me for more pics or questions

Thanks FBBO

 

[6pktgo]

Sale Pending

 

[6pktgo]

Sold

Sold, :blob1: Thanks Again To FBBO :happy3:

 

[fanucme]

What did you soak them in for cleaning ? I need to do this

 

[Classicironman]

I use Tide, and hot water and then a small soft bristle brush, just have to watch out around the labels if the stiching is weak they will come off. This will do a pretty good job, but it the dye is faded on the belts then you will just have to re-dye them. I put it all in a plastic bucket and you will be surprised if you let them soak over night how black the water will be. Hope this helps.

 

[6pktgo]

I just used Sunlight dish soap in the kitchen sink , let them soak over night and worked the belts back and forth, forming an "S" everytime until they flowed freely in my hands, all the time ,like Classicironman says, being careful of the tags. And yes you will be amazed how dirty the water is!