old man mopar
New Member
Need info on how to disassemble & assemble the felt on crank up windows and pop out windows on a 1968 RM21 Post Car.
68 RM21 post car crank up & pop out window question
- Thread starter old man mopar
- Start date
"old man"- might be able to help. I'm the original owner of a '68 Bee.BUT, the pop-out windows have no felt, just a rubber seal all around them. Let me look at my service manual.
- - - Updated - - -
OK- have never done it,but the only 'felts' showing are in track channels and just push in (maybe some weatherstrip adhesive on backside to help hold them?) and the strips on inside & outside of upper edge of door steel are held in with 'u-clips'(?) easier to visualize, then to describe.Pop them out with a screwdriver? Hope this helps.
- - - Updated - - -
OK- have never done it,but the only 'felts' showing are in track channels and just push in (maybe some weatherstrip adhesive on backside to help hold them?) and the strips on inside & outside of upper edge of door steel are held in with 'u-clips'(?) easier to visualize, then to describe.Pop them out with a screwdriver? Hope this helps.
Similar threads
