Cop Magnet
Well-Known Member
Hello, I am gauging interest in flipping my project for another. I need a quick turnaround on this to make the other one happen, so if you are seriously interested let me know and let's make this happen.
The car is a '69 Charger. Project comes with a 2004 Viper truck motor. It needs a custom built pan and pickup. Motor mounts are built. Harness and computer come with project. It has a Reilly (RMS) front subframe with coilovers. The TR6060 6-speed is brand new from the 2014 Viper. It has the flywheel and clutch to mate the older and newer engine/trans. Firewall is cut and trans tunnel is built. Needs driveshaft. Brakes are Wilwood manual discs front and rear. Wilwood manual master. Aftermarket manual rack and pinion. It has a new narrowed Strange engineering Dana 60 with 3.55 posi. It has Caltracs with monoleaf rear suspension. Full roll cage was custom built. No interior. Hot Rod wiring harness. The body is complete. It is flat black right now. The right rear quarter looks to be replaced, It comes with a restorable grill with no major defects. Tail light, vent windows, steering column, 2005 Cobra wheels and tires, stock steering column and wheel. Car has no glass but all mechanicals are there (best I could do is maybe three pieces of side glass). There are a lot of miscellaneous parts. The project was started a few years ago, and some parts show some wear (for example the discs have light rust), however everything is new and the components have seen no miles except the engine (21k miles). Lots of miscellaneous parts. All receipts go with the car.
I need 29k out of this. Obviously I have a lot more invested. The car has all the mechanicals to be a killer street/strip car. There's some work and parts needed, no question, but a major opportunity for someone. No low-ballers please!
The car is a '69 Charger. Project comes with a 2004 Viper truck motor. It needs a custom built pan and pickup. Motor mounts are built. Harness and computer come with project. It has a Reilly (RMS) front subframe with coilovers. The TR6060 6-speed is brand new from the 2014 Viper. It has the flywheel and clutch to mate the older and newer engine/trans. Firewall is cut and trans tunnel is built. Needs driveshaft. Brakes are Wilwood manual discs front and rear. Wilwood manual master. Aftermarket manual rack and pinion. It has a new narrowed Strange engineering Dana 60 with 3.55 posi. It has Caltracs with monoleaf rear suspension. Full roll cage was custom built. No interior. Hot Rod wiring harness. The body is complete. It is flat black right now. The right rear quarter looks to be replaced, It comes with a restorable grill with no major defects. Tail light, vent windows, steering column, 2005 Cobra wheels and tires, stock steering column and wheel. Car has no glass but all mechanicals are there (best I could do is maybe three pieces of side glass). There are a lot of miscellaneous parts. The project was started a few years ago, and some parts show some wear (for example the discs have light rust), however everything is new and the components have seen no miles except the engine (21k miles). Lots of miscellaneous parts. All receipts go with the car.
I need 29k out of this. Obviously I have a lot more invested. The car has all the mechanicals to be a killer street/strip car. There's some work and parts needed, no question, but a major opportunity for someone. No low-ballers please!
