• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB 69 Roof internal frame (front and drivers side)

Status
Not open for further replies.

RGAZ

Well-Known Member
Local time
5:46 AM
Joined
Jan 12, 2010
Messages
512
Reaction score
353
Location
Greenwood, SC
Feedback: 1 / 0 / 0
Looking for the internal structure for the front and driver's side roof of a 69-era RR. Would like in one piece if possible, roof skin is optional. 2-door, not 4-door cars.

Specifically, the front structure and the frame structure above the driver door.

Prefer Chicago-area or midwest to pickup. I'll come get it.

Prefer if I can decide on cut-out points if possible.

Prefer if from a post-car vs. hardtop.

PM with pictures if you have something to work with.

Thanks,
Randy
 
Just went through this with a car that had bad rust due to the prior vinyl top. Decided it was easier to replace the whole roof. Rust free donor roof from salvage yard was $300 plus shipping. Much better solution if the front and rear glass are already out. Mine had rust in driver side front of roof, drip rails over driver window and both sail panels. Inserting a piece into a roof can be a PITA.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top