70' AirGrabber Hood

[5.7 hemi]

Does anyone have a pic of the 1970 RR airgrabber hood engine call out at the rear of the hood with the turn signals. I'm missing the call out and the turn signals are re-popped so no biggie there. Thanks!!!

 

[Photon440]

There are two parts - the actual call out which is a sticky, self adhesive thin metal plate such as this http://www.ebay.ca/itm/1970-383-THI...Parts_Accessories&hash=item35e12311db&vxp=mtr (all three engine sizes are reproduced)

and the mount for it, which is the exact same shape but slightly thicker and with two mounting studs that use speed nuts and go through the two holes in the hood casting.

 

[5.7 hemi]

Where might I find the mount with studs then? I ordered the turn signals so I need to find this piece. Thanks for the link!!!!

 

[Photon440]

You'll want part # VC186 http://www.mrmoparts.net/reproduction-back-of-hood-nameplate-backing-pate-70-rr-gtx/ They also stock the 383 - 440 - HEMI call-outs on their site.

 

[5.7 hemi]

Thanks Photon440.....you rock!!!

 

[Mr. B5]

Lousy cellphone pic:

 

[5.7 hemi]

Thank you for the pic!!!!