any advice also please

[benno440]

just run 1/2" fuel line in my charger for my stroker engine, i have 1/2" sender in tank to 1/2" line to engine bay. i still hve a holley mechanical pump which has 1/4" npt thread sozes. and i also want to run an inline filter from fuel line to pump andyone have any ideas or advice on what fittings i would need ( sizes, reducers etc.) to complete this

thanks

 

[67 coronet]

1/2 inch is huge for fuel line unless you are running a monster motor.are you sure about that size?3/8 is fairly common and 5/16 is stock.

 

[benno440]

i was recommended to use this, they said that you will still have a restriction and higher pressure at the fuel pump but the bigger fuel line will always have the available fuel there for the stroker. moparmuscle magazine also recommend doing it if you go bigger than a 440, my old lines were too small as my car used to be a 318 so i just went big incase i supercharger it one day