B-Body 8 3/4

[Citrus1973]

I'm looking for an 8 3/4 that would bolt into my '79 Cordoba. Sure grip and 3.55 or 3.91 gear ratio would be very desirable. i live in central Florida, so closer to here would be nice.

 

[moparsteve636]

A c-body will fit nicely,I put one in my magnum gt years ago! Housings are cheaper too!

 

[Citrus1973]

Would I have to change driveshaft length to use an 8.75?

 

[sparkykd]

I have one in a 67 Monaco getting ready to pull it out.

 

[bill440rt]

I have an 8-3/4 housing out of a '68 - '70 Charger/B-body. Also, a driveshaft out of an early '70's B-body.
Can ship no problem. I'm in NJ.

[email protected]

 

[hemidart]

Re: B-body 8.75 rear end assembly, located in florida

COMPLETE REAR END ASSEMBLY, FITS: B-BODY, Includes brand new drums, brand new brake shoes and hardware, this is a open center chunk 295.00 pick-up perferred

MOPAR CHARLIE
727-271-5068

Located in the TAMPABAY FLORIDA AREA

 

[bill440rt]

I have an 8-3/4 housing out of a '68 - '70 Charger/B-body. Also, a driveshaft out of an early '70's B-body.
Can ship no problem. I'm in NJ.

[email protected]

Correction to my previous post. It must be out of a '73-up B-body car, as the locating holes on the spring perches are larger than '68-'70.
Photo attached.

 

[bill440rt]

Housing AND driveshaft are SOLD.