B-Body Door Hinge Rollers

[ilm65]

Greetings, All; I'm a new member looking for some advice: I'm rebuilding the door hinges on my 65 Satellite. I have the new bushings installed and was ready to finish the installation when I realized the rollers are trash. I've searched online and can't find just the rollers. I purchased a pair of 67-68 Camaro door hinge rollers (they looked similar) and haven't received them yet to see if they fit--or can be modified (gosh, sure hope the car doesn't lose its appeal). Does anyone know where I can get genuine door hinge rollers for my Mopar?

 

[Joe Mopar]

Not sure if they sell them separate but try Kramers.

 

[iraqivet01]

http://www.jegs.com/webapp/wcs/stor...40&N=1511059+4294908904&catalogId=10002&Nty=0

 

[ilm65]

Not sure if they sell them separate but try Kramers.

Hi Joe Mopar,
Kramers has them as part of a $90 kit. My problem is I already have the bushings, pins, springs and only need the rollers. I'll let you know if the 67-68 Camaro rollers fit or can be made to fit.
Bob

 

[ilm65]

http://www.jegs.com/webapp/wcs/stor...40&N=1511059+4294908904&catalogId=10002&Nty=0

Greetings iraqivet01,
Thanks for the link to Jeg's hinge kit listing--I tried both Jeg's and Summit but no rollers. I'll let you know if the 67-68 Camaro rollers can be made to fit.
Thanks also for your service; I'm a Viet Nam era vet myself.
Bob

 

[DODGER]

hi,
have you seen this http://cgi.ebay.com/ebaymotors/UPPER-DOORHINGE-SPRING-ROLLER-1962-1965-DODGE-_W0QQcmdZViewItemQQhashZitem588b184f30QQitemZ380290748208QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

[Redpolara]

Alternatively, are you handy with a lathe or know someone that is?