body patch panels

[wolfdodge]

Does any of you Mopar guys know a company that makes lower patch panel for 67 Belevedere frt. fenders, you can get them for 65 back and 68 up but some reason not much made for one of these most popular model GTX.

 

[barbee6043]

yes seems like 66- 67 b body are overlooked years, have one!

go to a steel co. that sells steel and get some 18 ga. and fab your own. thin enough you can put that slight curve on it. find one that also bends metal, as they will always have some scape, cheap! easy to learn.

 

[Max440]

Looking for the same thing

Does any of you Mopar guys know a company that makes lower patch panel for 67 Belevedere frt. fenders, you can get them for 65 back and 68 up but some reason not much made for one of these most popular model GTX.

I am looking for the patch panels as well. Have not found them yet - so looks like a donar piece if I can find a good one or fab one. I just finished fabing a rear quarter on my 67 Satellite. I have HUGE hour in it. I bet over a 100 hours and still not totally done - but it does look good.

Let me know if you find a source and I will do the same. BTW Sherman panels are junk and not worth using. Body lines are off and fender well is arched differently so your trim will not fit. total POS