Bucket seat supports...

[19Fury63]

I am going to be putting my front seats back in soon and would like to know if anyone knows where to get the cylindrical seat supports for front buckets. The ones I have are about 1-3/8" diameter, and about 1-1/2" tall...and are metal. I know I need 4 per seat, but for some reason the previous owner only had 2 on each, and used a mess of stacked washers for the missing supports. I would have to assume new supports are either rubber or polymer material in lieu of the metal OEM ones.

I would love to do this right before I put them back in, so if anyone knows where to find these supports I'd really appreciate it. I checked Classic Industries but they don't list a size, or even list that they are compatible with my car.

 

[HitIt]

Do you mean the seat back stops that keep the seat from leaning too far back? If so classic industries has them part #MD2032.
They also list a mounting pad set MD2029 but I'm not sure what it's for exactly.

 

[19Fury63]

No, sorry..I am referring to the supports under the seat frame rails....what the seat actually sits on when attached to the floor of the car. The bolts to hold the seat down, and attach the seat belt go through them.

When I get home I will snap a picture and post it so you know what I'm talking about.

 

[HitIt]

like this?
http://www.classicindustries.com/mopar/parts/md2029.html

 

[19Fury63]

Yep, that's the part I saw earlier this morning but no size is listed...do they make them in just 1 size? I'd almost think so, but don't want to assume too much before I spend the money.

Sorry I missed that in your first post, one of those days haha.