C clips on Ujoint at Pinion Flange?

[Macdon221]

Hey All,

Does the C clips go on the u-joint where it is mounted to the Pinion Flange? Ie where the 2 clamps clamp to the ujoint?

if so is the C opening out-facing or in-facing?

thanks

macdon221

 

[1 Wild R/T]

Yes the clips go on the two caps that seat in the yoke... The way they face isn't critical.. The fact that they are in place is critical... Seen many caps disappear through the years cause guys that work on GM's are use to the little tabs on the yoke retaining the caps..

 

[R/T Boy 67]

As above.

 

[Macdon221]

Thanks so much…got them on!!