Carlisle parts N135-136

[rmchrgr]

I'm looking to generate a little interest ahead of time for the FBBO guys walking the Carlisle swap meet. (I posted this on FABO as well but edited it for here.) I'll be setting up early PM Thursday and will be there through Sunday when it starts clearing out. I try to bring clean, usable stuff and price it to move. Read through the list below to get an idea but feel free to ask if I might have something specific. Keep in mind there's probably nothing super rare or special that I'm giving away cheap but there will be a couple interesting parts.

Since this is not a for sale thread you'll have to stop by spot N135-N136 to see what's what. To be clear, most everything I bring will be fairly priced. It will all be tagged and easy to inspect. If I'm at the spot, I'll answer your questions as best as I can. If not, one of the guys I'm with will or they'll get in touch with me directly.

Here's a general list;

• I have a bunch of stock/aftermarket mild performance small block parts. I spent some time this last week cleaning up what I felt was worth the time and some items are actually pretty decent. Think aluminum intakes, oil pans, fuel pumps, stroker pistons, etc. etc. The things I don't bother to clean up will dirt cheap.
  
  
• There will be a few 'packages' of parts that work together like say a fuel pump with dual feed carb lines, fittings and a pressure gauge included. I will try to include stuff like fittings, gaskets, hardware, etc. where I can if possible.
  
  
• Some '68-'70 B body parts, a few of which are hard to find.
  
  
• Couple stock/mild performance big block parts, similar in nature to the types of small block parts I'll have on hand
  
  
• Some general 4 speed parts and possibly a complete OD unit with linkage if I can get it out of my storage beforehand
  
  
• General parts that fit multiple applications like alternators, radiator fans, etc., all priced to move
  
  
• Might possibly bring some wheels
  
  
• There will be a bin of FREE things that I don't have any interest in cleaning up or holding on to

Hope to see some of you guys there. Again, it's spot N135-136. Come say hi, we don't bite.

- Greg

 

[Richard Cranium]

Have you got an 11” clutch cover and a good used 66-69 horn relay?

 

[rmchrgr]

I don't have a clutch cover, sorry. I actually have an 11" bell but I'm not selling it.

I might have the horn relay, I'll look and reply back when I find it.

 

[rmchrgr]

Have you got a good used 66-69 horn relay?

I have the horn relay in hand. Not sure if it's an OE part but it came off a '68 Coronet. I'll bring it with me.

 

[JoePole]

Long shot but as far as SBM pistons.....got any H116CP .030?

 

[rmchrgr]

Long shot but as far as SBM pistons.....got any H116CP .030?

Sorry, I don't have those exact pistons.

I do however have a set of '74 factory pistons in the standard 4.000" bore still attached to the rods I will sell super cheap.