Changing from Federal to Saginaw p/s pump in 440 swap

[Stewsta]

Im swapping my 318poly to a 78' 440 in my 66 Coronet and going with a saginaw pump. I have the 440 source p/s bracket that works with any saginaw pump and Im not sure which pump to buy. Classic Industries shows a saginaw pump available for the year but without the resevoir and I need the resevoir and at the same time they dont show hoses available for a 66 with saginaw pump. What pump can i use and which hoses can i use? Thanks

 

[747mopar]

Did the same thing, when I ordered the hose they asked Saginaw or federal, I ordered the Saginaw hose and then ordered a fitting for the power steering gear box.

 

[Stewsta]

Thanks 747mopar,
I guess my main problem is I cant find a hose to order for a 66 with a v8 and saginaw pump. All the hoses are for Federal pumps.

 

[747mopar]

My parts store (Auto Value) ordered me a 67 Charger hose for a Saginaw, it fit both fittings but had an incorrect bend for mine. I ended up getting a hose for the 69 Charger and then used the correct fitting to adapt it to my power steering box. If I remember I'll see if I can find a part #.

- - - Updated - - -

http://www.bpeusa.com/BPEpsLINES.asp This should fix you up, read at the bottom "can be used on 62-69". If not these guys will likely have whatever you need.

 

[Stewsta]

Thanks a bunch. Exactly what I was looking for.

 

[747mopar]

No problem.