SOLD Coated Headman Headers #78030

[Mopar Man 73]

I have for sale a restored pair of Headman headers #78030 that I had professionally sand blasted and then black ceramic coated by my local coater (Embee Performance Coatings
). Here in So-Cal.
They fit various years of both B & E bodies with 361 B engines up through 440 RB. Check out the Headman website for further details. They are in very good condition and still in bubble wrap from the coater. Only a couple of little dings from the previous owner, otherwise great and ready to install. I've decided to go a different route with my '63 Dodge so I won't be needing these headers after all. Asking $325.00 obo + UPSG shipping.
Also willing to trade for the following: Good quality/powered Mig or Tig welding machine of same value, possibly other small shop machines for home machine shop.

View attachment 336386 View attachment 336391 View attachment 336395

 

[moparjohnny]

I have for sale a restored pair of Headman headers #78030 that I had professionally sand blasted and then black ceramic coated by my local coater (Embee Performance Coatings
). Here in So-Cal.
They fit various years of both B & E bodies with 361 B engines up through 440 RB. Check out the Headman website for further details. They are in very good condition and still in bubble wrap from the coater. Only a couple of little dings from the previous owner, otherwise great and ready to install. I've decided to go a different route with my '63 Dodge so I won't be needing these headers after all. Asking $325.00 obo + UPSG shipping.
Also willing to trade for the following: Good quality/powered Mig or Tig welding machine of same value, possibly other small shop machines for home machine shop.

View attachment 336386 View attachment 336387 View attachment 336390 View attachment 336391 View attachment 336392 View attachment 336394 View attachment 336395 View attachment 336412

did these have to be dented in some places to fit in eng compartment? clearence for starters? thanks

 

[Mopar Man 73]

Not that I remembered. The driver's side header inside view is shown in the bottom last picture. Shows no signs of any clearance dents. I can double check the passenger side to confirm on that as well.
Primary tubes are 1 3/4" and collectors measure 3.00" so there shouldn't be much of any clearance issues.

 

[BATCORONET]

Not that I remembered. The driver's side header inside view is shown in the bottom last picture. Shows no signs of any clearance dents. I can double check the passenger side to confirm on that as well.
Primary tubes are 1 3/4" and collectors measure 3.00" so there shouldn't be much of any clearance issues.

have you tried to fit up or mock up these hedders to ur 63 ? if so have you incountered any issues ? tnx4urtime BAT

 

[Mopar Man 73]

No I haven't as it's still set up for the slant 6, K member and all. Didn't do the V8 swap yet.

 

[Mopar Man 73]

Still for sale! Any takers or interested folks? New asking price $300.00 obo or trade as previously mentioned above & further down below.

 

[odwan12]

bump. i have these in my 65 plymouth sat. no bumps or dents, all plugs fit perfect and easily accessible

 

[Mopar Man 73]

Also willing to trade for good pair of core early 5.7L Hemi heads.

Also looking for 1"-2" taller than original (good quality) Max Wedge or early hemi (taller) '65 hood scoop.

Anyone interested?????

 

[YY1]

Interested but shipping across the country is going to kill it.

 

[Mopar Man 73]

Interested but shipping across the country is going to kill it.

But for the overall cost compared to buying new from Summit ($460-$470) , it still works out cheaper. UPS ground to most of the eastern seaboard will be around $45 +/-.

 

[Mopar Man 73]

did these have to be dented in some places to fit in eng compartment? clearence for starters? thanks

No fitment clearance dents at all ! Here's how they looked before I took them in for sand blasting & ceramic coating. as you see in the earlier pictures, they look very nice now and are ready for action.

 

[6-david-5]

No fitment clearance dents at all ! Here's how they looked before I took them in for sand blasting & ceramic coating. as you see in the earlier pictures, they look very nice now and are ready for action.

View attachment 338773

Mopar Man

Message sent.

 

[Mopar Man 73]

Sale pending