Couple of quick Manual disc conversion questions..

[icetech]

Disregard.. found the answer to most of my post.. can't seem to delete it though

Still don't know if the single pot pushrod will work in the dual port MC though..

 

[AndyOpi66]

I don't have an early b, but I was able to reuse the original rod from my single pot master on the dual I got from a 1976 dart.

I know there is an adjustable one sold, which I was going to go for, but it wouldn't have worked with my brake switch so the old one works just fine. This was a manual brake car to start off with though and still is manual disc/drum.

Hope this helps!

 

[Don Frelier]

It did on my 66.

 

[icetech]

Thanks much guys