Fly wheel Info needed PLease .......

[rog_allen]

1969 roadrunner 383, 4 speed A-833..swapping to a 1974 440 motor...
my 1969 383 flywheel is a 6 bolt,143 tooth (none balanced ) 11 inch clutch
with this new 440 I need a ( balanced Flywheel )
here is one on ebay can anyone please tell me if this is the one i need ?
http://cgi.ebay.com/ebaymotors/ws/e...0722120272&viewitem=&sspagename=STRK:MEWAX:IT

any and all advice helpful thanks

 

[darkhorse]

Looks like it to me. its says Chrysler 70-72,externally balanced, 6 bolt, 143 tooth- 440 flywheel. that's what you want,right?

 

[rog_allen]

Thanks darkhorse i figured it was but it said 70-72 and dont say nothing about 11inch clutch

 

[darkhorse]

From the MCleod website for that flywheel fits 464202-18c
For clutch patterns...
4. 10, 10.5, 10.95" B&B-DIAPHRAGM
5. 11, 12" B&B-DIAPHRAGM-SHOULDERED BOLT

 

[rog_allen]

ohhhhh boy does this mean i can run my same clutch and presure plate ?
so thats the right fly wheel and it will acept all them clutches ?

 

[darkhorse]

Best advice my friend ,when In doubt call Mcleod tech dept. that way you should have no doubts about your purchase. IMHO

 

[rog_allen]

tHIS ONE IM THINKIN 4 SURE ,THEY REPLYED SAYS IT will accept 10 1/2, 11" and 12" clutch, all 3 sizes
http://cgi.ebay.com/ebaymotors/ws/e...0524164291&viewitem=&sspagename=STRK:MEWAX:IT

 

[Meep-Meep]

The external balance compensation is on the flywheel so your existing P plate will work.