Contact seller
A set I replaced in my 67 GTX. The one from the pass side is basically as-new. The driver side one has an indent from a garage door opener (not mine) and a small cut near the front edge. The indent on the top of the driver side is not as pronounced and possibly swapping them from side to side would help appearances somewhat. I set it out in the sun for a few hours to see if it might relax but not much change. Possibly a heat gun might do some good. The couple small black streaks in the top one of the second picture (hard to see) were grease or something and cleaned off after I took pictures. Rods are not included. Good for a driver. $15 + shipping.