• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Garage Floor

Tempest 455

Well-Known Member
Local time
5:26 PM
Joined
Oct 1, 2013
Messages
594
Reaction score
663
Location
Nashville
Been waiting 3 years to get my garage done. This was the last major part.

Very happy w/ the way this turned out! :) Thought some may like this.

IMG_1800.1.jpg

IMG_1827.1.jpg

IMG_1831.1.jpg
 
Pretty shiny. Just be careful with any water on the floor. Can get very slippery.
 
Cool looking for sure! I like very smooth floors vs gritty for good foot traction. Smooth floors are much easier to sweep and clean too but that one looks like ice lol. Love the post car too!
 
I agree with the above, but it does look great. Is it epoxy coated?


Yes its epoxy. Base coat, followed with metallic/clear.

The most crucial part was, grinding the floor smooth. Guy that did it used a large 3' diameter grinding wheel. Said if not, will look like great paint on bad bodywork. The grinding, prep work took the majority of time.

Sorry, should have put this in garage section.
 
Don't drop anything small..:) Looks good..but I wonder about the practicality..
 
It's sure is perty....LOL
 
That is pretty sexy! Don't do a burnout in the garage!
 
Don't drop anything small..:) Looks good..but I wonder about the practicality..

Actually very.

Looks great for one and is stain/spill resistant. I noticed an immediate reduction in the amount of times my dehumidifier cycles. So it's already provided a significant moisture reduction.
 
That is nice! I would have to put a fridge, bar and a tv out there.
 
Looks better than the paint job on one of my cars.
 
Wow, that is amazing! I'd ruin that in about 4 hours...........
 
That is nice! I would have to put a fridge, bar and a tv out there.

Thanks for the positive comments. Actually, I'm going to do just that. I have two garages and this one is the clean one. Other one is for working on stuff. Other one has the lathe, welder, drill presses etc. Hopefully I can keep this one clean because the other sure is not!
 
Who's product is it? Or did a local contractor do it with something "Secret"?
 
That floor is disgustingly sick!!!! Yeah, I'm jealous!!!
 
Who's product is it? Or did a local contractor do it with something "Secret"?

It's 2 coats of epoxy, base coat and a clear with metallic for the swirl look. Local company called Surface Koatings makes the product and they have a contractor install. They make some very nice products!
 
Auto Transport Service
Back
Top