Gauges.....mechanical to electronic conversions?

[Hemi31]

Who or where can this be done? I have seen it and they look 100% factory but searching I have yet to find the company name. I have a 66' Charger Dash( non working) I would like to keep in the race car but I need to gauges to be compatible with the modern electronics.

 

[Hemi Rebel]

Hmmm. What guages does it have? The factory ones are electronic. Gas guage, oil pressure and coolant. Speedo runs off a cable. The amp guage should be changed to a volt meter

 

[Matrix2]

look at this web site, http://chargerspecialties.com/, great guys.

 

[HYRDGOON]

Dakota Digital or Classic Instruments (or Classic Industries)

I plan to eventually go to a Dakota Digital VHX system


Oops Just re-read the original post and saw you want Original Factory look. My bad! These places won't look factory

 

[Hemi31]

Hmmm. What guages does it have? The factory ones are electronic. Gas guage, oil pressure and coolant. Speedo runs off a cable. The amp guage should be changed to a volt meter

Everything needs to be compatible with 2010 electronics.

 

[Hemi Rebel]

Everything needs to be compatible with 2010 electronics.

I understand you are running a 3g motor, but as far as the guages go you would just need to use the factory sending units for oil pressure and coolant temp . Convert the amp meter.