Logan Woloszak
Member
What headers will fit a 318 1966 satellite? Manual steering.
Headers
- Thread starter Logan Woloszak
- Start date
Belvedere408
Well-Known Member
do you want headers that hang low to the ground? I just put some Doug’s D453 on my 67 Belvedere 4 spd power steering. Fit perfect
Darter6
Well-Known Member
A 318 in 66 is a A engine polyspherical head. Only one manufacture is TTi .
If you have a LA 318 that was swapped, many more to choose from .
And possible it may be a LA 273 that was available in 66.
Does it look like this ? A Poly.
Last edited:
Belvedere408
Well-Known Member
Good call I forgot about the wide block.
Logan Woloszak
Member
It’s a LA block
Darter6
Well-Known Member
Being a LA you have to go by what your budget will allow.
Coated headers will run in the $400 to $1200 range. Places like Summit and Jegs have their brand budget friendly.
Then you have Hooker,Dougs,TTi,Headman,Patriot, to name a few.
Most seem to favor Dougs on the Bodies sites.
Coated headers will run in the $400 to $1200 range. Places like Summit and Jegs have their brand budget friendly.
Then you have Hooker,Dougs,TTi,Headman,Patriot, to name a few.
Most seem to favor Dougs on the Bodies sites.
Last edited:
Similar threads
