Hemi aluminum seat brackets

[texas wedge]

Hi, does anyone have the deminsions or patterns for A100 hemi seat brackets, i need to build a pair for my 64 savoy. Thanks.

 

[Rapid_Transit]

Hello
I have a set that was copied from a Original A-990 aluminum front end car. Good buddy of mine sold it to Englehart (sp) several years ago, and made a couple copies...The set he gave me are not finished. They have the lighting hole piloted but undrilled. But still, If you want I can throw up a few pics, and break out a tape measure.

Bob

 

[texas wedge]

Hello
I have a set that was copied from a Original A-990 aluminum front end car. Good buddy of mine sold it to Englehart (sp) several years ago, and made a couple copies...The set he gave me are not finished. They have the lighting hole piloted but undrilled. But still, If you want I can throw up a few pics, and break out a tape measure.

Bob

Hi, man i sure wish you could post pics. and measurements, thanks.

 

[Rapid_Transit]

Here some info

Here you go guys....Let me know if you have any other questions, or need diff pics.

Bob C

http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Number=4909889&an=0&page=0#Post4909889

 

[texas wedge]

Here you go guys....Let me know if you have any other questions, or need diff pics.

Bob C

http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Number=4909889&an=0&page=0#Post4909889

Thanks, this is just what i needed!

 

[texas wedge]

Rapid_Transit, are these seat brackets all supposed to be the same size? Is one side higher than the other? Someone please school me on this, thanks.