hemi hornet

[PsyOps]

Get that tape measure out.

And the Sawzall.

 

[dodgeboy440]

need some in put.for the hemi, the shop guy will probley sell me all bells an wistles for it. im thinking 6-71 blower. now, its for the wow factor not horse power, figure the hemi is around 325 hp plus 100 for blower. that all im needing. so piston type any other info would be great

Love them 1st Gen Chryslers!
Ask Don Garlits If They’re Worth It !!

A great 1st Gen Resource……
“ www. hothemiheads.com”

Bob Walker is the USA distribution for Garlits
Performance Parts !
Check em out , you’ll be pleased !

Keep us posted on the project!!

Mopar2ya!!

John

 

[Wylee]

Love them 1st Gen Chryslers!
Ask Don Garlits If They’re Worth It !!

A great 1st Gen Resource……
“ www. hothemiheads.com”

Bob Walker is the USA distribution for Garlits
Performance Parts !
Check em out , you’ll be pleased !

Keep us posted on the project!!

Mopar2ya!!

John

thank you for the info!!!

 

[dodgeboy440]

thank you for the info!!!

You’re Welcome!
Here Are a Few Pictures of Those Great
Granddaddy’s That Set The Pace For Our
High Performance Goodness We Have Today
…….,,. CHRYSLER FIRE POWER………

And
A Pic of a Tool Steel Girdle Built & Used Back in The Day On Supercharged Motors To Beef
Up The Bottom End I’ve Still got……
Best Wishes On your Labor of LUV!

Mopar2Ya!

John

 

[PsyOps]

Love the Whale engines! Many eons ago I was walking the field at a Long Island NY car show and a fellow had stuffed a 354 or 392 (I don't recall) into a '67-'69 Dart. Two non-Mopar types were walking the other direction and as we passed I heard one tell the other "Yep, my old man had one just like that". Your proposed build just took me back. Speaking of Big Daddy, here is my screen saver...

 

[Wylee]

stoped by my shop dude, asking how we should start the hemi hornet project. i told/ask him what can ido to save some money.so for now wen i get her home( still building shed lol) i will take out engin/trany, Intier, go from there

 

[dodgeboy440]

stoped by my shop dude, asking how we should start the hemi hornet project. i told/ask him what can ido to save some money.so for now wen i get her home( still building shed lol) i will take out engin/trany, Intier, go from there

Cool !
Maybe This Will Help !!
Mopar2ya!!

 

[Wylee]

Cool !
Maybe This Will Help !!
Mopar2ya!!

View attachment 1832001

thats one sick setup, love it

 

[Wylee]

still putting shed togeather, time wise is tuff now . back to work, busy. havnt herd from the shop about the hemi. kinda dont want too here its ok to build lol. freakin expensive!!!

 

[PROSTOCKTOM]

My 74 Hornet Hatchback that I am playing around with.

Tom

 

[Nxcoupe]

I had a 48 Anglia that I out an old alcohol dragster 392 in. Had a Reath stroker crank, howards aluminum rods and custom pistons. Was 472 cubes, had heads ported by lockerman's porting service and a howards custom roller cam. Donovan gear drive and a 6-71 blower with a cragar drive. Had to use 2 coolant lift pumps off of city transit busses so I had water circulation so I could drive it. Was more than a blast to drive. I was 22 and it was the coolest car out of my geoup I ran with. Loved this car. Flood took it out unfortunately. Sold the engine off to a guy that put it into a 3 window 32 ford. Anglia body got sold and I cannot recall who I sold it to.
Good luck with your build.

 

[Wylee]

My 74 Hornet Hatchback that I am playing around with.

Tom

View attachment 1835476

View attachment 1835477

View attachment 1835478

wow, i love it!!!!