I also am looking for 2 inch super comp headers

[1969 charger rt]

wanted a set of 2 inch tube hooker super comp headers

 

[Pistol Pete]

I was considering those myself until I ran across this:
http://www.moparts.org/Tech/Archive/exhaust/17.html

You'll notice it's not just an opinion piece from a schlub like myself, but someone from Summit who'd be in a better position to judge.

 

[1969 charger rt]

i have ran them befor on eddy heads and have had no real problems so thats the set i want o yea and my 440 is no way a street motor but around here if your car dont run 9's on the street you better just watch the street races

 

[Pistol Pete]

I hear ya. I've run them myself on a Chally with no real fitment issues (other than dinging the bottom for drag link clearence) but every situation (E body vs. B body, p/s etc.) is different.

 

[dantrap]

I had a problem with the no.2 plug using 5903 hookers in my Roadrunner. The way the plug is positioned on the Ed heads, and tightness to the inner fender was a PITA. We cut and reangled the tube to get it to work. It also hit my bellhousing during installation from the bottom, engine installed. We ground some of the BH flange flat and 1/2" to fit, it is a Lakewood BH. I also ended up making the no.1 tube a slip fit on the drivers side to ease installation.