INTERIOR DASH PARTS NEEDED--- 68 Charger R/T

[mackda600]

Hey guys, getting ready to reinstall the whole dash back into the car, but need to button some odds and ends up first. I need the following parts:


Glove Box Door Spring (just need a functional spring, not the whole assembly)

Turn Signal Flasher Holders (2)

Bushing & Clip where Accelerator cable enters the housing

Front Headliner Moulding Clips (originals)


Let me know what you have. Please send me a PM for email address. Pictures preferred!


Thanks guys!

 

[mackda600]

REVISED:

Turn Signal Flasher Holders (1)

Trunk Lid lock strike (piece that bolts to trunk lid and holds truck to the latch) i have the latch need the strike.

trunk light plunger switch with 90* turn

Kick down linkage: rod that goes to the carb linkage. its the piece with the slot that ran along side the carb and goes to the main kick down bracket at the rear of the intake, I have everything else for the kickdown.
See picture from my previous post here: http://www.forbbodiesonly.com/moparforum/showthread.php?49928-WANTED-1968-Charger-Kick-Down-Linkage-440-4bbl-727

Please PM me with availability.

 

[mackda600]

PARTS LOCATED with exception of kickdown linkage THANKS!

 

[mackda600]

all parts located