• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB Looking for a gas cap and wheel lip molding

Status
Not open for further replies.

67 GTX

Well-Known Member
Local time
1:16 AM
Joined
Jan 17, 2011
Messages
746
Reaction score
143
Location
New York
Feedback: 1 / 0 / 0
Does anyone have a gas cap and/or passenger front wheel lip molding for a 67 Belvedere, Satellite, or GTX?

The part number for the gas cap is #2823339. I believe this cap was also used on 68 cars.
 
I believe 66-67 are the same... depends on if you're tank is vented or not or just the cap I have a locking cap for a 68 that isn't vented and my fuel pump pulls a vacuum so hard I had to pull a fuel line to get it off but in the off season keeps the gas fresh
Could be a 67 coronet is different some had a vent and some didn't but the cap will fit
 
Does the trim have to be mint?
Might have with a ding,
Sal in n.y.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top