Looking for a good MOPAR speed shop in Iowa

[JDS-70R/T]

Need a referal

I am going to pull the 440 6-pack motor out of my recently purchased 70 coronet R/T to have it gone thru. The master cylnder bled all over the inside fender well that needs to be cleaned up and repainted, but there is not enough room with the motor in the car to do it right. Also, it's been running like crap...feels like its missing when cruising....also hesitates when I get on it. My local mechanic (mopar friend) took a look at it and thinks its in the carbs, but he is not skilled enough to tackle a 6 pack setup. Since I do not know the history of the motor I would prefer to have the heads and oil pan pulled off to see what the guts look like while I am tackling the carbs. Thoughts on anyone talented in the midwest? Would prefer to stay in Iowa if there is someone really good, if not I can take it somewhere in the midwest.

Thanks

 

[Jimbo Billy Bob]

Where in Iowa are you?

 

[JDS-70R/T]

Central...just north of Marshalltown.

 

[Jimbo Billy Bob]

There is a guy here in Waterloo that has done amazing tune ups on my 440 6BBL set up. He runs a super fast Road Runner out at CF raceway and has worked on Mopars all of his life. His name is Steve Harvey and his number is 319-236-1035. Tell him the guy with the green 68 RR sent ya.

 

[coloradodave]

"Do not argue with an idiot. He will drag you down to his level and beat you with experience."

Love your tag line. True, so true...

 

[IQ52]

David Bruns
Mid America Racing Engines, Washington, Iowa
319-653-6282

2 hours and 5 minutes from you.

Good, REALLY good.

 

[Mopars & Missiles]

David Bruns
Mid America Racing Engines, Washington, Iowa
319-653-6282

2 hours and 5 minutes from you.

Good, REALLY good.

There's no question this is the guy I'd be talking to if I lived in Iowa and needed engine work.

 

[JDS-70R/T]

thanks guys. I appreciate the contacts. I will follow up with both and go from there.