Looking for a source for 66 /67 Charger inner fender splash guard

[Stowe]

Hello
I am looking for a source for RH and LF inner splash guards for 66 charger Hemi. From what I have found so far looks like they are the same regardless of engine spec.

Thanks
Chris

 

[Jerry Hall]

66-70 should be the same. AMD.

 

[dadsbee]

^^^Yep, and the OP needs to stop looking for "hemi" parts, as they cost 5 x the amount of the same 383 part...

 

[Stowe]

^^^Yep, and the OP needs to stop looking for "hemi" parts, as they cost 5 x the amount of the same 383 part...

The OP is well aware of the cost of Hemi parts, since I own the car. I referenced "hemi " in the posting because there was a discussion on if the part was universal to platform with all powerplants.

 

[dadsbee]

Sorry, guess you don't do humour, I'll move on...

 

[Stowe]

Can anyone confirm if the inner fender splash shield fits 66-70. AMD does not have it listed for 66/67 I included a picture for reference

 

[Jerry Hall]

66-67 inner fender splash shields are different than 68-70. Inner fenders are the same 66-70.

 

[440 4 speed]

Check with Doug Winslow he was making some 66-7 dodge b body splash shield stuff.

 

[RemCharger]

66-67 inner fender splash shields are different than 68-70. Inner fenders are the same 66-70.

100%

Just look at the contour difference between the two. Totally different fender.

 

[TN Mopar]

the rubber pieces of the splash shield are available from Detroit Muscle Technologies

look around the site
There are complete kits for auto and manual trans cars
as well as individual pieces

this is an auto complete set for referrence

https://www.detroitmuscletechnologies.com/b-body-66-charger-mega-splash-shields-set-auto/

 

[RemCharger]

Funny story; many years ago I sent Jim pictures for the splash shield seals to make these reproductions.. a few days later I was looking at them again, and noticed the front and rears had the same top seals (wrong)! Came to figure out the assembly line must have run out of one and just used what they had!
Anyway I got back to him and sent the correct pictures.
The original shields were from my brothers 67, an oct 66 build car.

 

[67 Mopar]

These are the 1st Gen Splash Shields sold by Doug Winslow. They come with hardware and rubber.

 

[440 4 speed]

These are the 1st Gen Splash Shields sold by Doug Winslow. They come with hardware and rubber.

View attachment 1252035

I thought you might answer, thanks. I don’t remember his site name/address.

 

[67 Mopar]

Winslow Motorsports if memory serves

 

[Jeremiah]

Doug makes nice parts