Looking for STR 14 - 6 top (440)

[Meep-Meep]

I have an STR 14 - 45 top with the holes cut out of the center to offer as a trade or sell separately. By the way not a difficult fix to restore back to original appearance with holes.

 

[69 Runner]

Are you sure that the 2X4 and six pack tops used the same BOTTOM? There was an inline and a crossram top for the STR-15, and they used different bases (so I'm told)

 

[moparmarkk]

if the 4500 top is not to bad i would be interested,how about a few pics?would you be looking to trade anything else for it?or how much?thanks,mark

 

[Meep-Meep]

Are you sure that the 2X4 and six pack tops used the same BOTTOM? There was an inline and a crossram top for the STR-15, and they used different bases (so I'm told)

I'm pretty sure the bottoms are all the same (not RB vs B models) but I never had all combos in one place to measure. I guess I'm putting some hope in manufacturing logic and hope it doesn't bite me in the A$$ later :edgy:

 

[Meep-Meep]

if the 4500 top is not to bad i would be interested,how about a few pics?would you be looking to trade anything else for it?or how much?thanks,mark

I'll get some pics up soon (now that I found my camera). The cut out looks like it was done on a mill, so it's a nice job. I just remembered it has three tapped holes in the top that might have been used to mount a Holley pressure regulator or something. These can be easily welded up or plugged with an aluminum rod and loctited in place then filed smooth. Since I have a mill and the setup will be easy I may even do this. I can even restore the center for a reasonable charge.

 

[Meep-Meep]

Oh, I got to rambling and forgot about the price. $100.00 as is or with the holes plugged.

 

[moparmarkk]

Meep-Meep,
Consider it sold! I'll pay the shipping...let me see some pics so we know we're on the same page. My regulator is on the firewall, but I might have to use the holes in some other way...so need pics. (Sure that wasn't for the coil bracket)?
Thanks,
Mark

 

[Meep-Meep]

OK Mark, here you go.

 

[moparmarkk]

Deal done! PM me with your address and info about shipping. (Think your right those look like fuel regulator bracket holes). I know it's Sunday but I can have a cashiers check in the mail for $120 on Monday morning. If shipping is more let me know.
Thanks,
Mark

 

[Meep-Meep]

$120.00 should be fine, but if not I'll let you know. Thanks.

Now, who has a 14-6 top for sale????

 

[nomax]

Here you go Meep Meep,heres a link to an add on Moparts.com for a STR-14 Six Pak set up.
http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Board=Engines&Number=5572559&page=0&fpart=1

All RB STR-14 Tops are interchangeble with the base intake.
I've been looking for a STR-14 dual inline setup if anyone has a lead on one.

 

[69 Runner]

uuumm...that's "wanted" ads:sFun_doh2:

 

[nomax]

uuumm...that's "wanted" ads:sFun_doh2:

If you read the ad....:tongueflap:

Wanted:

Edelbrock STR-15 crossram manifold with linkage with or without carbs. Willing to buy outright or I have an Edelbrock STR-14 intake manifold with an STR-14-6 six pack top, a 4150 single 4 barrel top or a 4500 Dominator four barrel top that I'd be willing to deal in trade.

 

[69 Runner]

Well...guess you told me 4 poster:no:

 

[Meep-Meep]

Thanks for the lead nomax. I sent him an email so will see what happens. If I find a dual quad setup I'll let you know.

 

[moparmarkk]

Nice!

Arrived today...this is what it will be under. Looks Great! Keep me in mind for spring fling! Thanks, Mark

 

[Meep-Meep]

Now that's what I'm talkin' about :woohoo: Let me know how it runs!!

And if you find that six pack top........

 

[jobbless]

here is a craigslist ad i found today hope it helps.. john

rare mopar manifold - $1 (brunswick)
Date: 2009-11-23, 8:31PM EST
Reply to: [email protected] [Errors when replying to ads?]

very rare edelbrock low profile aluminum 6 pak intake manifold, model # STR 14 - 6. Chrysler part # 3690187. high performance optional manifold used on 440 cuda, challenger, charger and roadrunner. top plate is interchangeable for other carbs. not manufactured since late 70's. will accept best offer or trade for complete cuda 440 6 pak hood scoop and gasket. thanks. bob 440-503-6211

* Location: brunswick
* it's NOT ok to contact this poster with services or other commercial interests



PostingID: 1479727358

* Copyright © 2009 craigslist, inc.
* te

$120.00 should be fine, but if not I'll let you know. Thanks.

Now, who has a 14-6 top for sale????

 

[rumblefish360]

Not here. It opens a Microsoft E-mail thing.

 

[superdart383]

I'm looking for an str-15 6 pack top any one have any leads thanks:hijacked: