lowering blocks on belvedere?

[hanstaill]

Hi i want to get a set of lowering blocks for my 66 belvedere sedan, 2 or 3" i think, does anyone run them on the rear?? I also plan to lower the fronts couple inches in the front by adjusting the torsion. it's a four door sedan and i'd love to have a nice lower stance and wanted to ask some reference and tips to getting the right one.

thank you!

 

[Ron Ward]

I've never used them, but you may encounter some clearance problems with a 3" drop, especially with the pinion snubber to floor and bump stop to rear end housing. It might be a good idea to crawl under the car supported by the rear axle on jackstands and measure the distance from the snubber and bump stops to the contact points.

 

[belvedere 67]

Mine 67 lowered itself about 3 inches when I took it off the trailer on Monday, and the torsion bar ripped through the K member. That REALLy sucked.