M/E WAGNER PCV VALVE

[Bill Monk]

I'm interested in this pcv valve.
http://mewagner.com/?p=444
My question for any of you guys using this is how to make it fit with stock valve covers? The stock valve cover has a 15/16 hole for the grommet and the stem on the stock pcv valve is 7/16. That's where the problem is. The wagner valve is setup for a 3/4 grommet and I am not aware of anyone making a grommet to fit in the 15/16 stock cover with a 3/4 hole in it. (anybody know of one?) I thought about their in line adapter but that would be too small to fit the stock grommet because it would be 3/8 on both ends.....so how did you guys that have it make it work

 

[rlem1977]

Bill, that isn't the stock PCV, right. It's a little bigger?

 

[Bill Monk]

Bill, that isn't the stock PCV, right. It's a little bigger?

The wagner pcv goes into a 3/4" grommet so it clearly won't fit into the stock grommet which has a 7/16 hole for the stock pcv. What I need is a grommet to fit a stock valve cover 15/16 hole with a 3/4 id hole for the wagner pcv and I can't find that grommet anywhere

 

[MarPar]

@Yatzee

 

[rlem1977]

https://www.summitracing.com/parts/oer-3989348

 

[747mopar]

Beat me to it, even your local parts stores usually cary a variety.

 

[Bill Monk]

https://www.summitracing.com/parts/oer-3989348

outstanding!