0DegreeEngineer
Well-Known Member
Reinstalled window and chrome window seal cover assembly back together! Now I need to fix the door lock hole on the door, it appears to be a bad weld repair, will post photos of the door at a later time.
My In Violet 69 GTX project
- Thread starter 0DegreeEngineer
- Start date
0DegreeEngineer
Well-Known Member
Went to work on the door assembly Saturday Removed window regulator and cleaned and regressed, cleaned up the booger weld repair on the door I believe this hole was placed wrong for the door lock, got it cleaned enough to install the door lock trim ring, but the lock pull (black plunger is tight). Sprayed primer over bare metal and will clean up paint wise at another date, those who have seen my car at Midwest mopars know it is not show quality... haha. Reinstalled vent and window assembly, and adjusted on the bench.
0DegreeEngineer
Well-Known Member
After church this morning my wife came and gave me a hand reinstalling the door, test fit and adjusted fitment of forward and rear gaps and latch setup for easy door open and closing. I will need to adjust the rear quarter glass due to the fact the front glass is difficult to roll up with the door closed. I have to replace the rear window regulator anyways so I will take care of that then (handle screw broke off in post)but got the door on and took for a spin, sorry door installed picture is inside car capsule that's why it's so dusty.
Similar threads
