RustyRatRod
Well-Known Member
I need to know which parts will work. It's a car. A red one.
I need to know which parts will work. It's a car. A red one.
Ya don't need a 3/4 cam. They use that excuse to suck money out of ya! All you do is get a regular cam and cut off a quarter. It's best if you do it out of the middle & then use a wide hose clamp to hold it together. Just remember to torque the screw to 20 lb ft. Once that's done wrap it with three layers of black duct tape and you're good to go. Just remember, this only works with the red car. If it's any other colour then you have to use the silver duct tape and replace the pushrods with matchsticks 3/32" square.I don't know about your red (I'm assuming 60's or 70's Dodge), but here's a 7 paragraph post about what works on my 2007 chevy crate engine that I hope to buy. (BTW, my engine builder is going to put in a 3/4 cam, so now you know that I know what I'm talking about)
I don't see how there could be that much difference.
What would I do without yall?