SOLD NEW 512 RB short block

[Jet Doc]

512 RB short block, 1972 casting 10.720, block cleaned, bored and honed with plates, align honed, ARP main studs installed, has 3/8 pickup I was going to use external system. Paperwork included.

- 4.380 flat top Diamond pistons with Total Seal conventional rings 1/16,1/16,3/16
- Ohio H-beam 4340 rods with ARP 2000 bolts .990 pins
- Ohio 4340 crankshaft 4.250 stroke. Crank has provision for 4 speed pilot.
- fully balanced
- F/M fully grooved main bearings, King narrowed rod bearings, std/std, cam bearings installed, dist bushing installed.
- compression 75cc=12.7 80cc=11.7 84cc=11.3 with .039 head gasket and -.008 deck.

-ALL NEW NEVER RUN $3500 will ship through Fastenal at your expense. Woodstock, IL 60098

 

[partmopar]

3/8 or 1/2 inch oil pick up hole?

 

[Jet Doc]

I need to check.

3/8 or 1/2 inch oil pick up hole?

 

[Hemiwes]

Hey Jet Doc, what kind of ball park HP/TQ numbers would come of this engine with the new Trick flow heads, and performer RPM intake, hedman shorty headers, and a 950 CFM carb? probably a custom ground cam as well?