New AMD door skins

[1962polara]

Just recieved a flyer for 1963-65 door skins from AMD ..just a heads up to the guys needing some

http://www.autometaldirect.com/images/catalogs/B-Body_DoorSkin_11-29-16.pdf

 

[moparsteve636]

Any one looking for these, or any other AMD sheet metal Contact me for prices. I'm an AMD dealer!

 

[crossram 426]

That's great news for people needing them!

 

[Glenwood]

awesome! Maybe full Dodge quarters are in the future.

 

[dartforforty]

awesome! Maybe full Dodge quarters are in the future.

I talked to Joe Suchey at Carlisle this year about AMD making quarters for the 65 Coronet.
His opinion was it would not be cost effective tooling wise to produce a 1 year only part.
But who knows stranger things have happened.

 

[Glenwood]

I talked to Joe Suchey at Carlisle this year about AMD making quarters for the 65 Coronet.
His opinion was it would not be cost effective tooling wise to produce a 1 year only part.
But who knows stranger things have happened.

Same with the 64 I guess. Even a half quarter would be better than nothing. How much tooling would it take to alter the rear section of the Belvedere (full quarter available) quarter for a half skin? Then maybe the skins would be good for 63-65 if cut short of the tail lights...

It amazes me how many parts look to be the same between Dodge and Plymouth but are only listed for Plymouth.

 

[dartforforty]

Same with the 64 I guess. Even a half quarter would be better than nothing. How much tooling would it take to alter the rear section of the Belvedere (full quarter available) quarter for a half skin? Then maybe the skins would be good for 63-65 if cut short of the tail lights...

It amazes me how many parts look to be the same between Dodge and Plymouth but are only listed for Plymouth.

Wheel arch on the 65 Coronet is different from the Plymouth

 

[Glenwood]

oh yeah, didn't notice that.

 

[moparsteve636]

The 65 has a flat surface as opposed to the 64 rounded lip!

 

[jay t.]

Upper and lower cowls would be nice

 

[glassman]

Just recieved a flyer for 1963-65 door skins from AMD ..just a heads up to the guys needing some

http://www.autometaldirect.com/images/catalogs/B-Body_DoorSkin_11-29-16.pdf

View attachment 376029

So, you need doors but very disappointed that AMD only is making the skins, and your doors are shot completely! What do you do? Contact Sled City Fiberglass and buy their inner door panels which are molded from the stock unit. All the dents and dimples are there and you can have your vent windows and your roll ups too. www.sledcityfiberglass.com

 

[poly1963]

need the door pillar re pop too

 

[glassman]

need the door pillar re pop too

I don't do the pillar for the 2 door post sedans, but I have a super nice set of steel sedan door shells