New VIC Jr. HEMI heads.

[Bigal75]

These look nice! If we could only get a reliable block supplier and a company that sells rocker arms for the price they're really worth.

http://www.edelbrock.com/automotive/mc/cylinder-heads/chrysler/victor-jr-bb.shtml

 

[Budnicks]

not bad #'s on a dyno test, I'm sure there's some more in there still too,
crate engines tested 528ci one with a single plane 4bbl & another test with a dual 4bbls

 

[Bigal75]

I'm curious to see the price .

 

[super-bee_ski]

I would have bought them over my Hansen Stage Vs......

 

[moparmarks]

I'm curious to see the price .

Me too. Anything new and US made for the Hemi is a plus. Comes with larger intakes too. I already have a new set of MP heads for my motor.

 

[SUPERSTOCKRACER]

I would have bought them over my Hansen Stage Vs......

Which stage V's did you buy? I love my stage V's big valve heads so far.

 

[Endangered Species]

The Eddie's are a nice head, and I'm really happy to see someone casting up Hemi Heads. BigAl is right we need someone to cast up Iron blocks again. I wonder if Edelbrock would want to cast up the Iron Hemi Block?
SSR is right though Stage V makes some of the nicest stuff out there, and Eric Hansen's service is super.

 

[Hemirunner]

http://www.summitracing.com/parts/edl-61175

 

[Bigal75]

http://www.summitracing.com/parts/edl-61175

That's reasonable!

 

[SUPERSTOCKRACER]

Says that they are only good with hydraulic roller cams and need pushrod oiling.

 

[Hemirunner]

Says that they are only good with hydraulic roller cams and need pushrod oiling.

The oiling hole appears to be there for feed to the rocker shafts. I'm assuming the 'hydraulic roller cam' only verbage is just because of the springs that they come set up with. If they didn't come equipped for rocker shaft oiling, they'd miss 95% of the market. I can't imagine anyone being that far off...

- - - Updated - - -

Putting a hydraulic roller in one of these can be a real PIA because of pushrod clearance. I've done a few that way, but it's lots of manual labor...

 

[snakeoil24]

I would have bought them over my Hansen Stage Vs......

stay with your Hansen Stage V heads they are still far better. These are just another version of what Edelbrock has made before for Chrysler. if you want a good set of aluminum Hemi Heads find a set made by Alcoa Castings will have a AI in a circle.

- - - Updated - - -

The oiling hole appears to be there for feed to the rocker shafts. I'm assuming the 'hydraulic roller cam' only verbage is just because of the springs that they come set up with. If they didn't come equipped for rocker shaft oiling, they'd miss 95% of the market. I can't imagine anyone being that far off...

- - - Updated - - -

Putting a hydraulic roller in one of these can be a real PIA because of pushrod clearance. I've done a few that way, but it's lots of manual labor...

Really why they say that, since the Hydraulic Roller requires so much more clearancing.

- - - Updated - - -

These look nice! If we could only get a reliable block supplier and a company that sells rocker arms for the price they're really worth.

http://www.edelbrock.com/automotive/mc/cylinder-heads/chrysler/victor-jr-bb.shtml

What's wrong with the casting from World?

 

[Bigal75]

stay with your Hansen Stage V heads they are still far better. These are just another version of what Edelbrock has made before for Chrysler. if you want a good set of aluminum Hemi Heads find a set made by Alcoa Castings will have a AI in a circle.

- - - Updated - - -

Really why they say that, since the Hydraulic Roller requires so much more clearancing.

- - - Updated - - -



What's wrong with the casting from World?

Everyone is waiting on blocks - there's none right now. That's what I've been told by FHO and Muscle Motors.

 

[snakeoil24]

World casting has them in Stock.

 

[Bigal75]

World casting has them in Stock.

They had non last week as per the builders I spoke to.