challengersteve
Well-Known Member
You are buying a Driveshaft for a 68 69 70 Roadrunner GTX with the Dana 60 Rear End.
This is a CORRECT Assembly Line Original Part and is Mopar 2852347.
This is part number correct for a 1968 with the 833 4 speed or 727 automatic but will work fine in any 68 69 70 Plymouth B Body with the Dana 60.
This is 50.39" long (u-joint center to center) and is a 3" diameter tube with the larger 7290 U-Joints.
This was a very early takeout part and has been stored inside for 40 years. There is NO DAMAGE and NO DENTS and this spins perfectly true. The original Mopar 2781937 U-Joints are still in place and are very tight but the caps outer are missing as shown.
This has been glass beaded and painted in steel epoxy so it will not flash rust.
This is 395.00 INCLUDING SHIPPING in the CONT USA.
I accept Paypal and credit cards over the phone.
Thank you very much, Steve Schweitzer
This is a CORRECT Assembly Line Original Part and is Mopar 2852347.
This is part number correct for a 1968 with the 833 4 speed or 727 automatic but will work fine in any 68 69 70 Plymouth B Body with the Dana 60.
This is 50.39" long (u-joint center to center) and is a 3" diameter tube with the larger 7290 U-Joints.
This was a very early takeout part and has been stored inside for 40 years. There is NO DAMAGE and NO DENTS and this spins perfectly true. The original Mopar 2781937 U-Joints are still in place and are very tight but the caps outer are missing as shown.
This has been glass beaded and painted in steel epoxy so it will not flash rust.
This is 395.00 INCLUDING SHIPPING in the CONT USA.
I accept Paypal and credit cards over the phone.
Thank you very much, Steve Schweitzer
