Proportioning valve placement and plumbing

[maxwell1]

Hi all Iam currently installing a disc conversion kit from MBM on my 70 GTX. I was wanting some advice on placement for access for ease of adjustment and plumbing. I have the valve that has an adjustment knob on top. Thanks Max

 

[67 coronet]

as long as its in the single line going to the rear you are fine to put it anyplace.i normally put them under the car,around front of drivers door.just reach under car to adjust.make sure it is above the frame rail so it wont get broke if you bottom out.

 

[69 GTX]

Can It be placed between the master cylinder & dist block?